All Categories ​>​ ​Products ​ > ​ ​Element V2 ​ > ​ ​Basics

Basics

How do I eLock my lights to protect them from turning on accidentally?

With the Element OFF, hold the button until it flashes RED, then release.... You may now cycle through High Red(H) or Low Red(L).... To lock the Element, select High Red(H) and hold until the light i…

Updated 7 months ago by Garrett Smith

What is a color set?

Each mode stores a color set that can hold up to seven colors from the color pallet.... Sequence 1 is seen without any activation of the chip.... Sequence 2 is only seen with activation of the chip.…

Updated 7 months ago by Garrett Smith

How do I turn my Element V2 on and off?

Click button to turn Element ON.... Once ON, the chip will always start with mode 1, click the button to cycle through each mode. The light will go back to mode 1 once it has cycled through all six m…

Updated 7 months ago by Garrett Smith

What is a mode?

A mode is a sequence on the chip that holds a color set and a flashing pattern. Each mode can have up to two sequences. The Element V2 has 6 modes to choose from.

Updated 7 months ago by Garrett Smith

What is a flashing pattern?

The style of the flashing... There are 12 flashing patterns to choose from for each color set and 13 if you have a loyalty upgrade.... The flashing pattern for sequence 2 will not work if the chip is…

Updated 7 months ago by Garrett Smith

What is a gap?

The empty blinks between the light strobes.... Only used in flux motion....

Updated 7 months ago by Garrett Smith

How to reorder my modes?

With the Element off, hold the button until it flashes green, then release.... You can now select High Green(H) or Low Green(L).... To re-order, hold button on High Green(H) until the light turns off…

Updated 7 months ago by Garrett Smith

What is a color tint?

A color tint is the brightness of the color. There are three tints to choose from (High, Medium, Low). To select a tint, hold the button down once you're on the desired mode until the light flashes o…

Updated 7 months ago by Garrett Smith

How do I master reset the Element V2 to default settings?

With the Element OFF, hold the button until the light flashes WHITE, then release.... You may now cycle through High White(H) or Low White(L).... To reset the Element, select High White(H), hold for…

Updated 7 months ago by Garrett Smith

What are motion functions?

The motion functions will have your element chip go from sequence 1 to sequence 2 in the specific mode you are in. Motion functions use the chip's accelerometer and react to the speed of your finger…

Updated 7 months ago by Garrett Smith

EmazingLights Help Center (opens in a new tab)

Powered by HelpDocs (opens in a new tab)