How do I change flashing patterns?

  1. With the light ON, click until you see the mode you want to edit.
     
  2. Hold the button until the light flashes BLUE, then release.
     
  3. You will see a low flashing blue. There are two flashing blue lights per mode. The first low flashing blue is to change the flash pattern for sequence 1 and the second faster low flashing blue is to change the flash pattern of sequence 2.
     
  4. To change the flash pattern of sequence 1 click past the first low flashing blue. If you wish to only change the flash pattern of sequence 2 hold the button on the low flashing blue until it turns off. You will notice the low flashing light will blink faster. This indicates you are in sequence 2 and ready to change flash pattern.
     
  5. After you click past flashing blue, click to explore your 12 flashing pattern options.
     
  6. Move the light to see a live preview of the flashing pattern with the programmed colors for the specified sequence.
     
  7. To select the flashing pattern, hold the button until the light turns off.
     
  8. If you wish to only change the flash pattern of sequence 1, once you’ve selected the flash pattern for sequence 1 you will notice the faster low flashing blue. To bypass programming flash pattern for sequence 2 hold down the button on the faster low flashing blue until it turns off to exit flash pattern programming for sequence 2.
     
  9. Repeat steps 5-7 to program flash pattern for sequence 2.  
     

How did we do?


EmazingLights Help Center

Powered by HelpDocs