How do I create my own color sets?

  1. With the light ON, click until you see the mode you want to edit.
     
  2. Hold the button until the light flashes ORANGE, then release.
     
  3. You will see a low flashing orange. There are two flashing orange lights per mode. The first low flashing orange is to program the colors for sequence 1 and the second faster low flashing orange is to program the colors for sequence 2.
     
  4. To program color set of sequence 1 click past the first low flashing orange. If you wish to only program color set of sequence 2 hold the button on the low flashing orange until it turns off. You will notice the low flashing light will blink faster. This indicates you are in sequence 2 and ready to be programmed.
     
  5. Click past the flashing orange to explore the color palette.
     
  6. When you find the first color you want hold the button down and release at high(H), medium(M), or low(L) to program the color’s tint. You can repeat this up to seven times.
     
  7. When looking for your other desired colors, move the light to see a live preview of the colors you’ve already programmed combined with the color you're currently looking at.
     
  8. To program less than seven colors exit programming the color set by going to the flashing white “Blank.” Hold the button down until you see a flashing red.
     
  9. If you wish to only program color set of sequence 1, once exiting programming of sequence 1 you will notice the second low flashing orange. To bypass programming color set of sequence 2 just hold down the button on the faster low flashing orange until it turns off to exit programming color set of sequence 2.
     
  10. Repeat steps 5-8 to program color set of sequence 2.
     
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Can't find what you're looking for?
Let us help you!
Chat with Us
Submit a Ticket
Support Hours
Monday - Friday
9AM - 8PM PST
Closed on Major U.S. Holidays
Call Us
1-855-362-9464